•
E300 configuration information (list of all the settings currently in effect)
•
Information about virtual printers
Back up and restore settings with Configure
You can back up and restore the following E300 settings through Configure:
•
Fiery System Settings
•
Color Settings
•
Scan Settings
•
VDP Resources (including FreeForm)
•
Virtual Printers
•
Server Presets
•
Fonts
•
Job Log
Back up settings with Configure
When you back up settings, you can specify which settings you want to save.
1 In Configure, select Fiery Server > Backup.
2
Follow the on-screen instructions to select the settings.
3 Click Backup to back up the selected settings.
Restore settings with Configure
If you have backed up your settings, you can recover them in Configure after a system crash. You can only recover
the settings that were selected for back up.
1 In Configure, select Fiery Server > Restore.
2 Select the backup reference file and the backup data file and click Next.
3 Follow the on-screen instructions to restore your settings and click Finish.
Reset the E300 to factory defaults
If you reset the E300 to factory defaults, the Held and Printed lists clear, but jobs in the Archived list remain.
1
Record any configuration settings that you would like to re-enter after resetting the E300 to factory defaults.
Configuration and Setup
Administering the E300
58
To Next Page
Loading...
Need help?
General
