Convert Paper Sizes
Select to automatically convert document paper sizes to the specified default paper sizes.
For example, if you select Letter/11x17->A4/A3, a letter size document is automatically printed on A4 paper.
This setting works in conjunction with Default Paper Sizes, as shown in the following two examples.
•
If Convert Paper Sizes is set to Letter/11x17->A4/A3, and Default Paper Sizes is set to US, jobs are printed A4/A3
size.
•
If Convert Paper Sizes is set to A4/A3->Letter/11x17, and Default Paper Sizes is set to Metric, jobs are printed
Letter/11x17 size.
This also includes E300 system pages such as the Start Page, Test Page, and Job Log.
Settings:
No (default)
Letter/11x17->A4/A3
A4/A3->Letter/11x17
Brightness
Use this setting to specify the image brightness for the print job.
Settings:
85% lightest
90% lighter
95% light
100% normal (default)
105% dark
110% darker
115% darkest
Printer Screen Mode
Select a screen mode to apply to pixel-based images (for example, an image from Adobe Photoshop)
Settings:
Resolution
Gradation (default)
Off
Screen type
Use this setting to specify a halftone screening method when printing graphics.
Settings:
Dot (default)
Line
Configuration and Setup
Configuring print job processing settings
44
To Next Page
Loading...
Need help?
General
