EFI Fiery E300 - PCL and VDP Settings; PCL settings

PCL settings
To access the PCL settings:
•
Choose Configure > RIP > PCL settings.
Default Orientation
Determine whether the text or image is oriented along the short edge of the paper (Portrait) or the long edge of the
paper (Landscape).
Settings:
Portrait (default)
Landscape
Form Length
Set the number of lines to be printed per page in PCL jobs.
Settings:
5-128 (default is 60)
Font Size (pt)
If the default PCL font selected in Font Number represents a proportionally spaced scalable font, determine the point
size (height) of the font.
Settings:
4.0-999.75 (default is 12.00)
Font Pitch (char/in)
If the default PCL font selected in Font Number represents a fixed pitch scalable font, determine the width of
scalable type. Pitch is measured by characters per inch, so 10-pitch type fits 10 characters per inch.
Settings:
0.44-99.99 (default is 10)
Symbol Set
Choose the PCL symbol set that best matches the needs of users printing to the E300.
Settings:
See the user interface for a complete list.
Font Source
Specify the PCL font source to be enabled.
Settings:
Internal (default)
Softfont
Configuration and Setup
Configuring print job processing settings
46