4 Click Save.
Note: To confirm all outstanding updates are installed, check for product updates (for example, click Check for
Product Updates on the Configure tab in WebTools).
User software
The user software applications and printer drivers are available through the following methods:
•
Download using WebTools
•
Updates through Fiery Software Manager (for more information, see Utilities)
Backing up and restoring the E300
You can back up and restore the entire E300 configuration or selected settings. Backing up the settings creates a
configuration file containing the current settings. Restoring the settings does not require reinstalling any software.
You can back up and restore in the following ways:
•
Use the Command WorkStation backup and restore features under Server to back up the E300 settings.
•
Use the Configure backup and restore features under Fiery Server to back up and restore the E300 settings.
For detailed information about how to use Command WorkStation to back up and restore settings, see Command
WorkStation Help.
Recommendations to preserve data
To preserve your data, we recommend the following:
•
Do not turn off the system while accessing the hard disk.
•
Back up your original data on your own media when you store and save data on the E300 hard disk.
•
Never reset the E300 hard disk.
•
Never do anything that might damage the E300 hard disk.
If the E300 hard disk or system software has any technical difficulties, data stored and saved on the E300 hard disk
may be irretrievably lost. If problems with the hard disk occur, we cannot assure extended storage of the following
data:
•
Third-party fonts
•
Print jobs
•
Color profiles, including profiles downloaded or edited using Spot-On
•
Job notes and instructions
•
Scanned image data
•
Jobs edited using Impose
•
Variable data documents
•
Address books
Configuration and Setup
Administering the E300
57
To Next Page
Loading...
Need help?
General
