EFI Fiery E300 - Native Document Settings; Enable Native Document Conversion Using Printme

Native Document settings
To access the Native Document settings:
•
Choose Configure > RIP > Native Documents.
Enable Native Document Conversion Using PrintMe
Enables the E300 to process native document file formats through the PrintMe Cloud Service.
Settings:
On
Off (default)
Send Licensing Updates to the Fiery Administrator Email Address
Enables the E300 to send licensing updates to the administrator email address. E-mail Service must be enabled, and
an administrator email address must be configured.
Note: This option is only available through Configure. It is not available through the printer control panel.
Note: This option is only available when Enable Native Document Conversion using PrintMe is selected.
Settings:
On
Off (default)
Configuration and Setup
Configuring print job processing settings
48