•
Scan jobs
•
Secure print jobs
•
VDP resources
•
Job log
•
FTP log
•
Email log
Software updates
The E300 includes multiple update options.
Managing firewalls
If the E300 is behind a firewall, configure a proxy server to allow the E300 access to the internet for automatic
updates.
To configure a proxy server, in Configure select Network > Proxy, then select Enable HTTP Proxy and enter the
required information about the proxy server.
In addition, if your network includes a firewall, make sure that the firewall is configured to enable communication
between the E300 and the client computers.
Configure System Updates
You can use the System Updates feature to schedule updates of the system software.
Plan system updates for when the E300 is not in use, such as nights or weekends.
While system updates are being installed, print jobs cannot be sent to the E300.
The E300 automatically reboots during the system update process. It may need to reboot several times.
1 In Configure, sign in with Administrator privileges, then click Fiery Server > System Updates and select Enable
System Updates.
2
Specify how frequently the E300 contacts the Update Server.
This feature sets a schedule for downloading updates.
Note: The system updates are performed only when there are no jobs in process. If the system updates might not
occur due to extensive printer usage, increase the frequency of updates (such as daily instead of weekly).
3 If you use a proxy server to connect through a firewall to the Update Server, click the HTTP Proxy Settings link. In
the Proxy dialog box, select Enable HTTP Proxy, enter the following information, and then click Save.
• Address: proxy server IP address
• Port: port used by the proxy server
• User Name: user name for accessing the proxy server
• Password: password for accessing the proxy server
Configuration and Setup
Administering the E300
56
To Next Page
Loading...