3
If no action is taken, then the job is suspended after 5 minutes (the timeout period).
4
When the job is suspended, it remains in the Printing queue until the user takes action. For example, the user can
choose Print, Hold, Cancel, Delete, or can change the job properties.
Workflow example 3
Assumptions:
•
Enable Job Mismatch is Off.
Note: When this setting is Off, the related fields are disabled.
If a mismatch job occurs, the following happens:
1
The job is sent to the printer.
2
An error message about the mismatch appears in Command WorkStation.
3
The message remains until you take action.
Configuration and Setup
Configuring print job management settings
53
To Next Page
Loading...
