EFI Fiery User Manual

82Service Guide: EFI Fiery Central integrated server
Servicing the Fiery Central integrated server with furniture
Replacing the FC integrated server in the furniture
1 Make sure that the left side panel is removed from the FC integrated server.
2 Place the FC integrated server upright on the furniture stand. Slide the FC integrated server forward just until its
front panel is aligned with the back edge of the table top.
Use the handle on the stability bracket to lift the rear of the FC integrated server and slide it forward.
3 Route the monitor cables (power and video) into the cutout in the back of the top panel. Pull each cable out of the
cutout in the top panel.
1Video cable
2Power cable
3 Top panel
4 Top cutout
5Back cutout
1
2
3
4
5

EFI Fiery Specifications

General

Category	Server
Processor	Intel Xeon
Operating System	Linux
Connectivity	Ethernet, USB, optional Wi-Fi
Supported Printers	Varies by model (designed to support specific printer models from various manufacturers)
Software	Fiery Command WorkStation