Eizo ColorEdge CS2740 User Manual

25
Chapter 4 Advanced Adjustments/Settings
Function Settings Description
YUV Color Matrix Auto
BT.601
BT.709
BT.2020
Select the YUV format of the input signal. Use this setting for
gradation collapse or other occurrences where the screen
is displayed incorrectly because of a problem with the input
signal.
Input Range Auto
Full
Limited
(109% white)
Limited
Depending on the external device, the black and white levels
in the video signal output to the monitor may be restricted. If
the signal is displayed on the monitor in its restricted form,
the blacks will be faint, the whites dull, and contrast will
be reduced. The brightness range of such signals can be
extended to match the actual contrast ratio of the monitor.
• "Auto"
The monitor automatically recognizes the brightness range of
input signals and displays images appropriately.
• "Full"
The input signal brightness range is not extended.
• "Limited (109% white)"
The brightness range of the input signal is
extended from
16 - 254 (10 bits: 64 - 1019) to 0 - 255 (10 bits: 0 - 1023) for
display.
• "Limited"
The brightness range of the input signal is
extended from
16 - 235 (10 bits: 64 - 940) to 0 - 255 (10 bits: 0 - 1023) for
display.
HDMI
Settings
Noise
Reduction
On
O󰀨
The small noises that occur in dark areas of an image are
reduced. Use this function to reduce noise and roughness in
images.
Note
• This can only be set when there is HDMI input.
• If signals of the following resolutions are input, the function
does not work even if set to "On".
1600 x 1200 / 1920 x 1200 / 2048 x 1080 / 2048 x 1152 /
2560 x 1080 / 2560 x 1440 / 2560 x 1600 / 3840 x 2160
For the supported resolutions for HDMI, see "HDMI" (page
10).
• Using the Noise Reduction function may lead to deterioration
of ne images.
Signal Information -
You can check the information for the input signal.
The following information is displayed:
1. Resolution / Vertical scan frequency
2. Input range
3. Color format / Color depth
4. Colorimetry
1
2
3
4
Note
• Some information may not be displayed depending on the
input signal.

Eizo ColorEdge CS2740 Specifications

General

Pixel pitch	0.155 x 0.155 mm
Screen shape	Flat
Pixel density	164 ppi
Response time	10 ms
Display diagonal	26.9 \
Adobe RGB coverage	99 %
Display technology	LED
Native aspect ratio	16:9
Maximum refresh rate	- Hz
Viewable size, vertical	2160 mm
Contrast ratio (typical)	1000:1
Display number of colors	1.07 billion colors
Display diagonal (metric)	68.4 cm
Viewable size, horizontal	596.2 mm
Digital vertical frequency	23 - 61 Hz
Digital horizontal frequency	25 - 137 kHz
Display brightness (typical)	350 cd/m²
Certification	CB, CE, TUV/GS, cTUVus, FCC-B, CAN ICES-3 (B), TUV/S, PSE, VCCI-B, RCM, EAC, RoHS, WEEE, TUV/Ergonomics
Product color	Black
Market positioning	Graphics design
Operating temperature (T-T)	0 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Energy efficiency scale	A to G
Power consumption (max)	168 W
Power consumption (typical)	36 W
Power consumption (PowerSave)	1 W
Pivot angle	-90 - 90 °
Tilt angle range	-5 - 35 °
Cable lock slot type	Kensington
Panel mounting interface	100 x 100 mm
USB hub version	2.0 / 3.2 Gen 1 (3.1 Gen 1)
USB upstream port type	USB Type-B, USB Type-C
Number of upstream ports	2
USB Power Delivery up to	60 W
USB Type-A downstream ports quantity	4
Number of USB Type-B upstream ports quantity	1
Cables included	AC, USB
Harmonized System (HS) code	85285210

Weight and Dimensions

Depth (with stand)	265 mm
Width (with stand)	638 mm
Height (with stand)	404.1 mm
Weight (with stand)	10300 g
Depth (without stand)	75 mm
Height (without stand)	378.2 mm
Weight (without stand)	6700 g