To Next PageTo Next PageWhat to do if the built-in correction sensor does not come out on Eizo ColorEdge CX271?
To address this issue with your Eizo Monitor, turn off the main power, and then turn it on again after a few minutes.
How to fix SelfCorrection failing to execute on Eizo Monitor?
To resolve this, verify that the ColorNavigator license is certified. Also, set the SelfCorrection target using ColorNavigator or ColorNavigator Elements.
General| Screen Size | 27 inches |
|---|---|
| Panel Type | IPS |
| Resolution | 2560 x 1440 |
| Color Gamut | 99% Adobe RGB |
| Brightness | 300 cd/m² |
| Contrast Ratio | 1000:1 |
| Aspect Ratio | 16:9 |
| Viewing Angles | 178° horizontal, 178° vertical |
| Stand Adjustments | Height, tilt, swivel, pivot |
| Response Time | 6 ms |
| Connectivity | DisplayPort, HDMI, DVI-D |
| USB Hub | Yes |
| Calibration | Hardware calibration |
Details the monitor's key technical specifications and capabilities.
Explains the function of buttons and indicators on the monitor's front and rear panels.
Details compatible resolutions and formats for digital inputs and OS settings.
Allows selection of various display modes like Standard, Paper, Adobe RGB, and CAL modes.
Guides on adjusting brightness, temperature, gamma, and color gamut for optimal color reproduction.
Sets the timing for SelfCorrection and enables/disables it for Standard Mode.
Explains how to manually execute the built-in correction sensor for display calibration.
Provides solutions for issues like no power, incorrect power indicator lights, or "No Signal" messages.
Addresses common imaging issues like brightness, blurriness, afterimages, pixel defects, and noise.
Covers troubleshooting for issues like the adjustment menu not appearing, no mode menu, USB device detection, and audio output.
Troubleshoots problems related to the built-in correction sensor and SelfCorrection execution.
Details the product's warranty period, terms, conditions, and exclusions for service.
