Commissioning
7.4 System settings
SCD 19102 / SMD 19102
70 Instruction Manual, 10/2011, A5E01588521A-004
4. Select either "For static pictures" or "For motion pictures" in line 6 in the "Blind mode"
menu using key 2.
6HOHFWಯ)RUVWDWLFSLFWXUHVರ
6HOHFWಯ)RUPRWLRQSLFWXUHVರ
5. Execute "Force"
command using key 2.
Note
For progressive timings with an image refresh rate greater than 60 Hz, only the item "For
static pictures" or "Reset" can be selected in line 6 in the "Blind mode" menu.
To Next Page
Loading...
