SCD 19102 / SMD 19102
Instruction Manual, 10/2011, A5E01588521A-004
83
Operation
8
8.1 Note for users
CAUTION
Settings must not be changed by users
None of the settings may be changed on site by the user. This also applies to settings
made using the display keys. These are therefore locked for certain applications. If settings
have to be changed, please contact the responsible servicing department.
If keyboard is locked, contact Service department
If the keyboard is locked, contact the service department in order to unlock it. If you unlock
it yourself, the warranty will no longer be valid!
8.2 Switching on the display
Following commissioning, operation is limited to switching on and off.
● Switch on the device using the power switch.
The green operation LED now lights up permanently.
See also
Troubleshooting (Page 87)
To Next Page
Loading...
