1. Introduction and Overview
iConnect User Manual
1
1. Introduction and Overview
This user manual explains all you need to know about your iConnect security system
andprovidesstep‐by‐stepinstructionsforallthesystem’suserfunctions.Inadditionto
theexplanationyouwillreceivefromyourinstaller,weurgeyoutoreadthismanualso
that you can take full advantage of your system’s features. Keep this manual in an
accessiblelocationforfuturereference.
The iConnect system has many features in order to suit a wide range of applications.
This manual outlines all of these features but it is likely that there are options that are
notrelevant to your
system.If youhave any questions regardingthe availabilityof the
featuresdescribedinthemanual,pleaseaskyourinstaller.
1.1. Documentation Conventions
Inordertosimplifythe proceduresthatappearintherestofthismanual,thefollowing
conventionsareused:
Item… Description…
Select… Use the arrow buttons to scroll through the options and press .
From the Event
Log Menu, select
Clear Log.
Enter the main menu by pressing and entering your user
code. Using the arrow buttons, navigate until you reach
Event Log and press . Using the arrow buttons, navigate
until you reach Clear Log and press .
From the Service
menu, select
Time/Date, Set
Date.
The same as above only this time you are navigating
through three menu levels.
[7012] The shortcut to a specific menu item from the main menu. In
this case, this is the shortcut for Set Date. These appear in
the procedures as an additional aid to menu navigation.
[#3] A shortcut to a specific item in a sub-menu. For example,
[#3] is the shortcut to HA Schedule in the sub-menu that is
opened once you have selected the Home Automation unit
you want to program.
, buttons
buttons that appear on the keypad (
, )
5.InterfaceTest
The text that actually appears on the LCD display (italics).
Note
Important caution, please pay attention.
To Next Page
Loading...
