7. Advanced System Operation
iConnect User Manual
35
The event – a brief description of the
event that occurred.
Zone descriptor – exactly where the event
occurred.
Time/date stamp – the exact time the
event occurred.
Report details – a single character indicating
whether the event was reported to the
central station. The options available are R:
Report Sent, F: Report Failed or N: No
Report.
Default descriptor – in this case the number of
the zone.
TheaboveexampleshowstheeventlogentryforaFirealarmintheKitchen(Zone4)on
November14
th
2008.Thereportwassuccessfullyreportedtothecentralstation.
7.7. Service Menu
The Service menu includes various functions that enable you to test your system
effectively.YoucangainaccesstotheServicemenuusingthemas t ercode.
Set Time & Date
Tosetthetime:
1. FromtheServicemenu,selectSetTime/Date,SetTime[7011].
2. Enterthecurrenttime.
Tosetthedate:
1. FromtheServicemenu,selectSetTime/Date,SetDate[7012].
2. Enterthecurrentdate.
Theformatoftimeanddateisdefinedbyyourinstallerinprogramming.Ifyou
are setting the time in 12hr format, use the HA On key to toggle between
AMandPM.
Message Center
The Message Center is designed to allow you to record a short message that may be
played back later by another user. After a message is recorded, Message Waiting is
displayedontheLCDuntilthemessageisplayedback.
Toplaybackarecordedmessage:
FromtheServicemenu,selectMessages,PlayMessage[7021].
Torecordamessage:
1. FromtheServicemenu,selectMessages,RecordMessage[7022].
2. Presstostartrecordingthemessage.
3. Recordyourmessage.Themessagemaybeuptotwentysecondslong.
4. Presstostoprecording;the
messageisautomaticallyplayedbackand
OK?isdisplayed.
5. Presstosaveyourrecording.
FIRE ALARM
11/14/08 12:34 R
FIRE ALARM
KITCHEN
FIRE ALARM
ZONE #4
To Next Page
Loading...
