31
1
EUROPEAN TYPE APPROVALS
All models are in compliance with the applicable European Directives in force and, as such,
they are marked with the symbol:
All products bearing this mark can to be sold directly in all member states of the European
Community.
To be entitled to apply the CE mark, the manufacturer must draw up a technical file which
ELEKTRA will place at the disposal of its clientele for all the various kinds of technical
controls.
The products are in compliance with the following Directives:
1992/59/CE General safety
1997/23/CE Pressure equipment - Module A
2002/95/CE Restrictions on use of some dangerous material
2002/96/CE Waste electric and electronic equipment
2004/30/CE Electromagnetic compatibility
2006/42/CE Machinery
2014/35/CE Electrical safety
TYPE APPROVALSE
To Next Page
Loading...
