34
NIGHT CYCLE (C adjustment 1.2)
Through the setting of a time of day, the machine enters into a state of partial operation
during which the temperature in the boiler is kept at a very low temperature (40°C).
In this state buttons with automatic dosing are not enabled, only the manual dosing buttons
can be operated.(C 1.2 ITA).
The following signaling is visualised in screen 1 during the night cycle: (UG4)
When this period of time has elapsed, the machine resumes normal operation.
See the following paragraphs..
Such cycle, as it does not cool down the machine completely, allows less limestone deposits
to accumulate in its hydraulic components and to save energy.
SWITCHING ON THE DISPENSING GROUPS
Once the boiler is hot, appears on screen 1 of each dispensing group, the switch marked by
symbol: (IC1)
Once the group is activated, the group starts reaching the previously set temperature
and signaling marked by symbol:UC43)
appears on the same screen.
When the group is hot, warning disappears.
At this point it possible dispense the coffees.
4
5
To Next Page
Loading...
