59
MAINTENANCED
1 ACCESS TO MAINTENANCE CONTROLS (C2 regolaz ITA)
By sliding horizontally to the left of the touch screen of each group, from the V9 screen we
access to the V10 screen, necessary for accessing to the maintenance commands.
These commands are reserved to the Technician only.
The technician will perform on this screen a graphic password known to him and will have
access to the following:
- Special machine operating parameters.
- Characteristics of the machine, so you know the upgrade level and the correct
spare parts.
- Commands to set up the equipment suitably in such a way can be compatible
to various interventions to be performed (on the left group only).
- Data reset commands.
To Next Page
Loading...
