38
With pushbutton: (IG32)
it is possible to go back to screen V8.
With pushbutton: (IG31)
it is possible to go back to the main screen V1.
With the button marked by symbol:(
is possible to save the set value
8.2 SETTING NIGHT-TIME CYCLE
Screen VP2 allows you to set the start and end time of the night-time cycle, in sequence, using
the plus and minus icons and, set this value by using the enter button
8 OPERATING PARAMETERS SETTING (A USO-4 pag 27 ITA)
8.1 SETTING TIME AND DATE
Screen VP1 allows you to set the current time and date using the plus and minus
icons and, confirming this by using the enter button
To Next Page
Loading...
