49
If problems arise with the appliance, consult the following guide and try to resolve
them by implementing the suggestions provided. If the problems persist, contact Technical
Assistance. Do not carry out repairs directly on the appliance .
The company Elektra declines any and all responsibility for tampering or interventions
carried out by non authorized persons.
Such intervention automatically renders the guarantee null and void.
The guide also contains problems that must be resolved directly by the Technical Assistance
Service but which are explained to facilitate comprehension and repair operations. (=)
BREWING NOT SATISFACTORY ALARM (C6 ITA)
If, after dispensing selected with an automatic pushbutton, for example (IC4)
the following alarm is displayed: (UG49)
the coffee may not have been made according to Italian espresso standards,
and therefore adjustments in tamping, dosing or grinding of the coffee powder are required.
Perhaps even adjustments to temperature or brewing pressure are required (see also chapter
“A - USE”, paragraph 8 and “C - SETTINGS”, paragraph 1).
As an alternative, there could be a fault or obstruction to the passage of water in some ele-
ment: contact Technical Assistance.
TROUBLESHOOTINGC
DISPENSING GROUP TEMPERATURE CONTROL FAULT ALARM
If on the main screen V1 the following alarm appears: (UC46)
a major fault has occurred.
Switch off the dispensing group and contact Technical Assistance .
1
2
To Next Page
Loading...
