33
SWITCHING ON THE APPLIANCE
The machine switches on by the switch marked with the symbol (A1 ITA)
placed under the machine itself.
When the machine is switched on, it automatically loads water into the boiler and, only when
the boiler is full does it switch on the heating, so as not to damage the heating elements.
The following signaling is visualised on screen V1: (UG3)
When the boiler is pressurised, signaling disappears.
At this point, it is possible switching on the dispensing groups.
SWITCHING ON THE LIGHTING (C21 ITA)
The lighting is switched on through marked with the symbol: (IG42)
on screen V1. (vedi paragrafo 1 sopra)
By the pushbutton marked by the symbol:(IG43)
of the same screen, you can switch from a slow colors rotation to a fix color of your own
choice, of the lighting of the posterior side of the bodywork.
SWITCHING ON THE CUP HEATER
Press the switch marked with the symbol:
on screen V1.(vedi paragrafo 1 sopra)
1
USEA
2
3
OPERATION INSTRUCTIONS
THESE INSTRUCTIONS ARE INTENDED FOR
BARMAN / ESPRESSO COFFEE MACHINE OPERATOR
To Next Page
Loading...
