EasyManua.ls Logo

ELEKTRA INDIE - MAINTENANCE AND CLEANING; Daily Cleaning Procedures

ELEKTRA INDIE
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
46
MAINTENANCE AND CLEANINGB
DAILY CLEANING OF DISPENSING GROUPS AND FILTERHOLDERS (=)
Each evening or at least once a day, clean the group shower and the filterholder gaskets
with a cloth or a sponge. Rinse the filters and filterholders in boiling water in order
to remove the fatty deposits of the coffee.
It is advisable to wash the inside of the filterholders and filters with a view to avoiding
incrustations and coffee deposits which could fall off during coffee making,
forming grounds in the cup.
DAILY CLEANING OF THE STEAM WANDS (titolo= + mix tra B2 e B3)
The steam wands, used for heating drinks, must be cleaned immediately after use
in order to safeguard against the formation of incrustations that could block the holes
of the spray nozzle and also to ensure that the residue of previously heated drinks does
not deteriorate, leading to the unhygienic formation of bacteria .
Externally clean with a moist sponge, the steam nozzle immediately after every milk prepara-
tion cycle. To clean the inside of the wand instead proceed as follows:
1) Fill a stainless steel pitcher with cold water up to at least the same level as the milk
residuals on the wand.
2) Place the wand into the water filled pitcher.
3) Regulate the steam dispenser by pressing the button marked by symbol
until the water boils, obtaining a complete disinfection of the wand. (B3 Pulizia montal AK)
WEEKLY CLEANING OF THE GROUPS (B5 pulizia)
At least weekly, it is necessary clean the dispensing groups from coffee leftovers with an
internal cleaning through a semi-automatic procedure guided by the machine .
That procedure is to be started only with hot machine ready to use and for each group, as
follows:
1) Substitute the standard filter mounted on the filter holder of the group with the blind (non
perforated) filter.
2) Insert an ELEKTRA clearing tablet in the blind filter and hook the filter holder
on the group.
3) Press the pushbutton: (IC31)
on the screen V9, displayed by swiping horizontally towards the left on the touch-screen
then confirm by pressing the key.
1
2
3
The cleaning starts on the group, running 10 dispensing loops of 20 seconds each one.

Table of Contents

Other manuals for ELEKTRA INDIE

Related product manuals