Need help?Do you have a question about the Elektron Digitone and is the answer not in the manual?
General| Type | Digital Synthesizer |
|---|---|
| Synthesis Method | FM (Frequency Modulation) |
| Polyphony | 8 voices |
| MIDI | In, Out, Thru |
| Multitimbral | 4 parts |
| Tracks | 4 synth tracks, 4 MIDI tracks |
| Sequencer | Elektron sequencer |
| Effects | Reverb, Delay, Chorus, Overdrive |
| Inputs | 2 x 1/4" input jacks |
| Outputs | 2 x 1/4" (left, right), 1 x 1/4" headphone |
| Power Supply | 12V DC |
| Storage | Internal |
| Dimensions | 8.5 x 7.3 x 2.3 inches |
| Weight | 3.1 lbs |
Essential precautions for safe operation, including fire, shock, and product damage risks.
Detailed description of the Digitone's front panel layout, buttons, knobs, and screen elements.
Identifies connectors and provides step-by-step setup instructions for the Digitone.
How to move through menus and adjust parameter values using keys and knobs.
Functions of TRIG keys, encoders, MIDI note input, and key selection logic.
Defines pattern contents and how to load sounds from +Drive/pool.
Switching patterns, chaining, controlling playback, and setting tempo.
Introduction to Grid Recording and Live Recording modes and trig types.
Using Grid Recording mode and the Track Note method for detailed note entry.
Using Quick Note method and Live Recording for real-time input and quantization.
Setting trig actions, track notes (scales, transpose), and voice allocation.
Options for quantizing, renaming, clearing, and saving pattern data.
How to lock parameters to specific steps for advanced sound design.
Applying sound locks to steps and using conditional logic for trigs.
Overview of the six parameter pages for synth tracks.
Parameters for note trigs and core FM synthesis parameters for Operator group A.
Configuring FM algorithm, frequency ratios, harmonics, detune, feedback, and mix.
Parameters for the operator envelopes, focusing on group A.
Detailed settings for operator envelopes including attack, decay, end level, and modulation amount.
Overview of the five parameter pages for MIDI tracks.
How FX settings are applied and detailed settings for the Chorus effect.
Configuring delay time, stereo width, feedback, volume, and filters.
Detailed settings for the Reverb effect, including pre-delay, decay, and filters.
MIDI CC and NRPN assignments for track and trig parameters.
MIDI CC and NRPN assignments for SYN1 FM parameters.
MIDI CC and NRPN assignments for SYN2 FM parameters.
MIDI CC and NRPN assignments for filter and amp parameters.
MIDI CC and NRPN assignments for LFO parameters.
MIDI CC and NRPN assignments for Chorus and Delay effects.
MIDI CC and NRPN assignments for Reverb and Master effect parameters.
To Next Page
