11. SYNTH TRACK PARAMETERS
42
11.5.1 ADEL
Envelope delay sets the time before attack phase of the modulation envelope for operator A starts.
(0–127)
Attack End levelDecayDelay
11.5.2 ATRG
Envelope trig sets the trig behavious of the operator envelops- The envelopes can be either triggered or
gated - making it either an ADE (Attack Decay End) or an ASDE (Attack Sustain Decay End) envelope.
The sustain phase does not have an adjustable envelope level. It is instead the LEV parameter that sets
the sustain level. The note length defines the length of the sustain phase.
Trigged (ATRG/BTRG ON)
Attack End levelDecay
Gated (ATRG/BTRG OFF)
Attack Decay End levelSustain
Note on Note o
11.5.3 ARST
Envelope reset sets if the envelopes should reset or not when they are retrigged.
Reset on (ARST/BRST ON)
To Next Page
Loading...
