12. MIDI TRACK PARAMETERS
52
ONE makes the LFO start from the beginning when a note is trigged, run for one cycle and then stop.
This setting makes the LFO function similar to an envelope.
HLF makes the LFO start from the beginning when a note is trigged, run for half a cycle and
then stop.
For more information about the Trig Modes, please see the illustration at the end of section “11.11 LFO
PAGE 2” on page 47.
12.6.8 DEP
Depth sets the depth and polarity of the LFO modulation. Both negative (inverted) and positive modula-
tion depth is possible. A center setting, 0.00, equals no modulation depth. (-64.00–63.00)
To Next Page
Loading...
