13. FX PARAMETERS
56
13.5.3 LPAN
Left pan sets the pan of the audio from the INPUT L audio input. (L64–R63)
13.5.4 RPAN
Right pan sets the pan of the audio from the INPUT R audio input. (L64–R63)
13.5.5 VOL
Pattern volume sets the patterns overall audio level. This parameter basically has the same function as
the MASTER VOLUME knob.
13.5.6 CHO
Chorus Send sets the amount of sound from the INPUT L/R audio inputs sent through to the chorus
eect. The audio from the INPUT L/R audio inputs is summed to mono before it is sent to the eect.
For more information, please see “13.2 CHORUS” on page 53. (0.00–127.00)
13.5.7 DEL
Delay Send sets the amount of sound from the INPUT L/R audio inputs sent through to the delay eect.
The audio from the INPUT L/R audio inputs is summed to mono before it is sent to the eect. For more
information, please see “13.3 DELAY” on page 53. (0.00–127.00)
13.5.8 REV
Reverb Send sets the amount of sound from the INPUT L/R audio inputs sent through to the reverb
eect. The audio from the INPUT L/R audio inputs is summed to mono before it is sent to the eect.
For more information, please see “13.4 REVERB” on page 55. (0.00–127.00)
13.5.9 OVR
Overdrive introduces distortion at the very end of the Digitone signal path. (0.00–127.00)
To Next Page
Loading...
