16. SETUP EXAMPLES
69
4. On the main screen, press [MIDI] and then [TRIG 1–4] to select a MIDI track.
5. Press [SYN1] and use the CHAN parameter to select a MIDI channel for the tracks output data.
6. Make sure to set your synthesizer to receive MIDI input in a way that corresponds to the settings you
made in the Digitone.
You are now ready to use the Digitone sequencer to control your synthesizer. For more information about
using the Digitone sequencer, please see “10. THE SEQUENCER” on page 27.
To Next Page
Loading...
