17. USEFUL KEY COMBINATIONS
71
[NO] + [TRIG] key during LIVE RECORDING clears the trigs from a sequencer track.
[FUNC] + [PTN] (long press) toggles the metronome on/o.
[FUNC] + [TRIG] adds lock trigs (when in GRID RECORDING mode).
MUTES
[FUNC] + [TRIG] keys mutes/unmutes one or several tracks.
UNISON
[FUNC] + [VOICE] toggles unison on/o. [VOICE] blinks if unison is not possible due to locked voices on
other tracks.
MODES
[FUNC] + [BANK] enters MUTE mode.
[FUNC] + double-press [BANK] toggles between PATTERN MUTE mode and GLOBAL MUTE mode.
[YES] + [PAGE] activates FILL mode for one pattern cycle.
Press and hold [PAGE] to activate FILL Mode for as long as [PAGE] is held.
Press and hold [PAGE] + [YES], and then release [PAGE] before you release [YES] to latch FILL mode.
Press [PAGE] again to unlatch FILL mode.
CLEAR TRACK/CLEAR PATTERN
[FUNC] + [PLAY] (while in GRID RECORDING mode) clears active track.
[FUNC] + [PLAY] (while in no mode or LIVE RECORDING mode) clears pattern.
RESET PARAMETERS
Press DATA ENTRY knob + [NO] to reset the parameter to the default value.
[PARAMETER] key + [PLAY] to reset all the parameters in the selected parameter page to
default values.
ARPEGGIATOR
[FUNC] + [TRACK NOTE] toggles the arpeggiator on/o.
[FUNC] + [SYN1] opens the ARPEGGIATOR menu.
To Next Page
Loading...
