EasyManuals Logo

ELTEX MES53xx User Manual

ELTEX MES53xx
208 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #57 background imageLoading...
Page #57 background image
MES53xx, MES33xx, MES23xx Ethernet Switch Series 57
console# configure
console(config)# interface {gigabitethernet gi_port | tengigabitethernet
te_port | fortygigabitethernet fo_port | oob |port-channelgroup |range{…}|
loopbackloopback_id }}
console(config-if)#
This mode is available from the configuration mode and designed for configuration of interface
parameters (switch port or port group operating in the load distribution mode) or the interface range
parameters.
The interface is selected by the following commands:
For MES5324
Table 5.27 List of interface selection commands for MES5324
Command
Destination
interface fortygigabitethernet fo_port
For configuring 40G interfaces
interface tengigabitethernet te_port
For configuring 10G interfaces
interface gigabitethernet gi_port
For confoguring 1G interfaces
interfaceport-channelgroup
For configuring channel groups
interface oob
For configuring control interfaces
interface loopback loopback_id
For configuring virtual interfaces
where
group sequential number of a group, total number in accordance with Table 2.9. Main
specifications (‘Link agregation (LAG)’ string);
fo_port sequential number of 40G interfaces specified as follows: 1..8/0/1..4;
te_port sequential number of 10G interfaces specified as follows: 1..8/0/1..24;
gi_port sequential number of 1G interfaces specified as follows: 1..8/0/1;
loopback_id sequential number of virtual interface corresponding Table Table 2.9. Main
specifications (‘Number of virtual Loopback interfacestring).
For MES3324F, MES2324, MES2324B, MES2324FB
Table 5.29 List of interface selection commands for MES3324F, MES2324, MES2324B, MES2324FB
Command
Destination
interface tengigabitethernet te_port
For configuring 10G interfaces
interface gigabitethernet gi_port
For configuring 1G interfaces
interfaceport-channelgroup
For configuring channel groups
interface oob
For configuring control interfaces (control interface is
not available for all MES2324x)
interface loopback loopback_id
For configuring virtual interface
where
group sequential number of a group, total number in accordance with Table Table 2.9. Main
specifications (‘Link agregation (LAG)’ string);

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ELTEX MES53xx and is the answer not in the manual?

ELTEX MES53xx Specifications

General IconGeneral
BrandELTEX
ModelMES53xx
CategorySwitch
LanguageEnglish

Related product manuals