ELTEX SBC-1000 - Page 122

122 SBC session border controllers
restart ntp
no/yes
Restart NTP process
set ntp
dhcp
period
server
usage
off/on
10-1440
IP address in
AAA.BBB.CCC.DDD
format
off/on
Obtain NTP settings via DHCP
Set synchronization period
Set NTP server
Do not use/use NTP
show config
Show
timezone set
GMT/GMT+1/GMT-
1/GMT+2/GMT-
2/GMT+3/GMT-
3/GMT+4/GMT-
4/GMT+5/GMT-
5/GMT+6/GMT-
6/GMT+7/GMT-
7/GMT+8/GMT-
8/GMT+9/GMT-
9/GMT+10/GMT-
10/GMT+11/GMT-
11/GMT+12
Asia
Europe
Set the time zone in relation to universal time
coordinates
Choosing a location city in Asia.
Choosing a location city in Europe
4.2.7.9 SNMP configuration mode
To enter this mode, execute snmp command in the configuration mode.
SBC-[CONFIG]-NETWORK> snmp
Entering SNMP mode.
SBC-[CONFIG]-SNMP>
Command
Parameter
Value
Action
?
Show the list of available commands.
add
<TYPE>
trapsink/
trap2sink/
informsink
Add SNMP trap transmission rule:
TYPE — SNMP message type
IP — trap receiver IP address;
COMM — password contained in traps.
PORT — trap receiver UDP port
<IP>
IP address in
AAA.BBB.CCC.DDD
format
<COMM>
string of up to 31
characters
<PORT>
1-65535
config
Return to Configuration menu.
create user
<LOGIN>
<PASSWD>
string of up to 31
characters
password from 8 to
31 characters
Create a user (assign a login and password for
access)
exit
Exit from this configuration submenu to the upper
level.
history
View history of entered commands.
modify
community
<IDX>
<COMM>
0-15
string of up to 31
characters
Change the SNMP traps transmission rule (the
password contained in the traps)
modify ip
<IDX>
<IP>
0-15
IP address in
AAA.BBB.CCC.DDD
format
Change the SNMP trap transmission rule (trap
receiver address)
modify port
<IDX>
<PORT>
0-15
1-65535
Change the SNMP trap transmission rule (trap
receiver port)