SMG digital gateway 101
Request sending attempts—the number of request retries to a server. When all attempts are used,
the server will be deemed inactive and the request will be forwarded to another server if it is
specified; otherwise, an error will be detected.
Server inactivity timeout after failure (sec)—amount of time when a server is deemed unavailable
(requests will not be sent to it).
Network interface—the selected network interface to send RADIUS packets from.
User authorisation WEB/telnet/ssh through servers RADIUS-authorization—enables authorisation
on the RADIUS server when a user tries to access the device via web interface, Telnet, or SSH.
When login/password are entered, an Access-Request packet is sent to the RADIUS server. In case
of success authorisation, the server replies with Access-Accept and the user is allowed to access
the device; otherwise, access is denied.
4.1.13.2 Profile List
Profile Parameters
Enable RADIUS-Authorization—enables/disables transmission of authentication/authorisation
(Access Request) messages to the RADIUS server.
Enable RADIUS-Accounting—enables/disables transmission of accounting (Accounting Request)
messages to the RADIUS server.
Modification Parameters
Modifiers for InCdPN—the selected callee (CdPN) number modifier for the incoming connection in
relation to the Called-Station-Id, xpgk-dst-number-in fields of RADIUS-Authorization and RADIUS-
Accounting messages.
To Next Page
Loading...
