ELTEX SMG-4 - Network Services

92 SMG digital gateway
4.1.9 Network Services
NTP is a protocol for synchronisation of real-time clock of the device. It allows synchronisation of date and
time used by the gateway against their reference values.
 Enable—enables time synchronisation via NTP.
 Time server (NTP)—the IP address or host name of the NTP server.
 Timezone—configuration of the time zone and GMT (Greenwich Mean Time) offset:
– Manual mode—defines the GMT offset.
– Automatic mode—this mode allows selection of device location; the GMT offset will be
determined automatically. This mode also enables automatic switch to daylight saving
time.
 Synchronisation period (min)—an interval between synchronisation requests.
 Save—saves changes.
 Cancel—discards changes.
To force time synchronisation with the server, click the ‘Restart NTP-client’ button (the NTP client will be
restarted).
4.1.9.1 SNMP Settings
SMG firmware enables device status monitoring via SNMP. The SNMP submenu allows configuration of
SNMP agent settings.
SNMP monitoring allows the following parameters to be requested from the gateway:
 gateway name;
 device type;
 firmware version;
 IP address;
 E1 streams statistics;
 IP submodules statistics;
 linksets state;
 E1 stream channels state;