ELTEX SMG-4 - Static Route Configuration Mode; SIP;SIP-T General Configuration Mode

SMG digital gateway 159
4.3.17 Static Route Configuration Mode
To enter this mode, execute the route command in the configuration mode.
SMG4-[CONFIG]> route
Entering route mode.
SMG4-[CONFIG]-ROUTE>
Command
Parameter
Value
Action
?
Show the list of available
commands
config
Return to the Configuration menu
exit
Return from this configuration
submenu to an upper level
history
Show the history of entered
commands
quit
Terminate this CLI session
route add
<DESTINATION>
<MASK>
<GATEWAY>
<METRIC>
<IFACE_NAME>
<ENABLE>
IP address in the
AAA.BBB.CCC.DDD
format
Mask in the
AAA.BBB.CCC.DDD
format
Gateway in the
AAA.BBB.CCC.DDD
format
Unsigned integer
String, 255 characters
max.
disable/enable
Add a route:
DESTINATION—destination IP
address;
MASK—network mask for the
specified IP address;
GATEWAY—gateway IP address;
METRIC—metrics;
IFACE_NAME—network interface;
ENABLE—enable/disable the
network route.
route del
<IDX>
0-4095
Remove a route:
IDX—network route index.
show
Show route configuration
information
4.3.18 SIP/SIP-T General Configuration Mode
To enter this mode, execute the sip configuration command in the configuration mode.
SMG4-[CONFIG]> sip configuration
Entering SIP/SIP-T/SIP-I/SIP-profile config mode.
SMG4-[CONFIG]-SIP(general)>
Command
Parameter
Value
Action
?
Show the list of available commands
cause codes KZ
<ON_OFF>
on/off
Enable/disable the specification in