ELTEX SMG-4 - СDR Configuration Mode

128 SMG digital gateway
show startup
radius_servers
Show the initial RADIUS server
configuration
show startup snmp
Show the initial SNMP
configuration
sip configuration
Enter the SIP/SIP-T
configuration mode
sip interface
<SIPT_INDEX>
0-63
Enter the SIP/SIP-T interface
configuration mode
sip cause profile
<PROFILE_INDEX>
0-63
Enter the configuration mode
of profiles with Q.850 causes
matching SIP replies
ss7cat
Enter the SS-7 category
configuration mode
ss7timers
<SS7_TIMERS_INDEX>
0-3
sync
Enter the configuration mode
for
synchronisation parameters
syslog
Enter the system log
parameters configuration
mode
trunk
<TRUNK_INDEX>
0-63
Enter the trunk group
configuration mode
trunk_direction
<DIRECTION_INDEX>
0-31
Enter the trunk direction
configuration mode
4.3.6 СDR Configuration Mode
To enter this mode, execute the cdr command in the configuration mode.
SMG4-[CONFIG]> cdr
Entering CDR-info mode.
SMG4-[CONFIG]-[CDR]>
Command
Parameter
Value
Action
?
Show the list of available commands
archive
<all>
<directory>
String, 31 characters
max.
String, 31 characters
max.
Archive CDR data
category
save
yes/no
Save /do not save subscriber category
in CDR files
config
Return to the Configuration menu
emptysave
<CDR_EMPTY>
yes/no
Save / do not save empty CDR files
enabled
<CDR>
yes/no
Generate / do not generate CDRs
exit
Return from this configuration
submenu to an upper level
ftp enabled
<CDR_FTP_RES>
yes/no
Transfer / do not transfer CDRs to the
FRP server
ftp login
<CDR_FTPLOGIN_RES>
String, 31 characters
max.
Specify a username for access to the
FTP server
ftp passwd
<CDR_PASSWD_RES>
String, 31 characters
max.
Specify a password for access to the
FTP server
ftp path
<CDR_FTPPATH_RES>
String, 63 characters
max.
Set a path to the CDR storage folder
on the FTP server
ftp port
<CDR_FTPPORT_RES>
1-65,535
Specify a TCP port for the FTP server
ftp server
<CDR_FTPSERVER_RES>
String, 63 characters
Specify IP address of the FTP server