Write / do not write the following
header at the beginning of a CDR file:
SMG4. CDR. File started at
"YYYYMMDDhhmmss", where
"YYYYMMDDhhmmss" is the records
saving start time.
Show the history of entered
commands
A path to CDR data storage on a USB
drive.
Show the settings of the CDR data
storage path
A period of CDR data storage on a
USB drive
Save CDR data on a USB drive
modifiers table
outgoing called
Set a modifier table for callee number
for outgoing communication
modifiers table
outgoing calling
Set a modifier table for caller number
for outgoing communication
modifiers table
outgoing redirecting
Set a modifier table for redirecting
number for outgoing communication
modifiers table
incoming called
Set a modifier table for callee number
for incoming communication
modifiers table
incoming calling
Set a modifier table for caller number
for incoming communication
modifiers table
incoming redirecting
Set a modifier table for redirecting
number for incoming communication
Set a period for CDR generation and
saving in the device RAM, days
Set a period for CDR generation and
saving in the device RAM, hours
Set a period for CDR generation and
saving in the device RAM, minutes
Terminate this CLI session
Add / do not add the Redirection Tag
additional field to CDR
Add the Redirecting Number
additional field to CDR; otherwise, the
redirecting number will replace the
calling party number in redirected
calls
Transfer / do not transfer CDRs to the
redundant FTP server
String, 31 characters
max.
Specify a username for access to the
redundant FTP server
String, 31 characters
max.
Specify a password for access to the
redundant FTP server
String, 63 characters
max.
Set a path to the CDR storage folder
on the redundant FTP server
Specify a TCP port for the redundant
FTP server
String, 63 characters
max.
Specify IP address of the redundant
FTP server