ELTEX SMG-4 - Configurator Exit; Command Line, List of Supported Commands and Keys; System of Commands for SMG Gateway Operation in the Debug Mode

114 SMG digital gateway
To view the detailed system information (factory settings, SIP adapter version, current date and time,
uptime, network settings, internal temperature), click the System Information link in the control panel.
4.1.23 Configurator Exit
Click the Exit link to exit the configurator; the following window will open in your browser:
To resume access, specify the defined username and password and click the Sign In button. To exit the
configurator, click the Cancel button.
4.2 Command Line, List of Supported Commands and Keys
SMG features several debug terminals with specific functions:
 Terminal (com port)—enables device configuration and firmware update via CLI (command line
interface).
 Telnet port 23—terminal duplicate (com port).
 SSH port 22—terminal duplicate (com port).
4.2.1 System of Commands for SMG Gateway Operation in the Debug Mode
To enter the debug mode, connect to CLI and enter the tracemode command.
help
Show the list of available commands
quit
Exit the debug mode
logout
Exit the debug mode
exit
Exit the debug mode
history
Show the list of previously entered commands
radact [on/off]
Turn RADIUS on/off