ELTEX SMG-4 - List of CLI Commands

SMG digital gateway 117
Modifications made to configuration via CLI (command line interface) or the web configurator will be
applied immediately.
To save the configuration into the non-volatile memory of the device, execute the save command.
Initial startup username: admin, password: rootpasswd.
Given below is a complete list of commands sorted in the alphabetic order.
4.3.1 List of CLI Commands
Command
Parameter
Value
Action
?
Show the list of available
commands
alarm global
Show information on the current
faults
alarm list clear
Clear the fault events log
alarm list show
Show the fault events log with
fault type and status, occurrence
time, and localisation
parameters.
Config
Enter the device configuration
mode
CPU load statistic
Show CPU load for the last
minute
date
<DAY>
<MONTH>
<YEAR>
<HOURS>
<MINS>
1-31
1-12
2011-2037
00-23
00-59
Set the device local date and
time
exit
Terminate this CLI session
firmware update tftp
<FILE>
<SERVERIP>
firmware file name
IP address in the
AAA.BBB.CCC.DDD
format
Firmware update without
automatic gateway restart
FILE—firmware file name
SERVERIP—IP address of the
TFTP server:
firmware update ftp
<FILE>
<SERVERIP>
firmware file name
IP address in the
AAA.BBB.CCC.DDD
format
Firmware update without
automatic gateway restart
FILE—firmware file name
SERVERIP—IP address of the FTP
server
firmware update usb
<FILE>
firmware file name
Firmware update without
automatic gateway restart
FILE—firmware file name
firmware
update_and_reboot
tftp
<FILE>
firmware file name
Firmware update with automatic
gateway restart
FILE—firmware file name