SMG digital gateway 113
4.1.21 Password Configuration for Web Configurator Access
The link is intended for handling the passwords which are used in the web configurator to
access the device.
Configuration of Web Interface Administrator Password
To change the administrator password, enter a new password in the Enter Password field and confirm it in
the New Password Confirmation field. To apply the password, click the Set button.
To save the configuration, use the Service—Save Configuration menu item.
Web Interface Users
This section allows configuration of web interface access restrictions for users. A system administrator can
always add or remove users and define their access level.
To create, edit, or remove users, use the following buttons:
— Add User;
— Edit User Parameters;
— Remove User.
The program allows neither modification of administrator permissions nor his removal from the user list
that ensures access to the program for system administrators at any time.
[username]—the username to log in the web interface.
[enter password]—the password to access the web interface.
[confirm password]—used to confirm the password to access the web interface.
To save the configuration, use the Service—Save Configuration menu item.
Configuration of Administrator Password for Telnet and SSH
This section is used to change the password for Telnet, SSH, and console access.
To change a password, enter a new password in the Enter Password field and confirm it in the New
Password Confirmation field. To apply the password, click the Set button.
4.1.22 View Factory Settings and System Information
To view factory settings and system information, use the Help—System Information menu item.
The factory settings are also specified on the label located in the lower part of the device casing.
To Next Page
Loading...
