ELTEX SMG-4 - Numbering Schedule Configuration Mode

SMG digital gateway 149
<PORT>
1-65535
config
Return to the Configuration menu
create user
<LOGIN>
<PASSWD>
String, 31 characters
max.
A password, from 8 to
31 characters
Create a user (define an access login
and a password)
exit
Return from this configuration
submenu to an upper level
history
Show the history of entered commands
modify community
<IDX>
<COMM>
0-15
String, 31 characters
max.
Modify a rule for SNMP trap
transmission (the password contained
in traps)
modify ip
<IDX>
<IP>
0-15
IP address in the
AAA.BBB.CCC.DDD
format
Modify a rule for SNMP trap
transmission (the trap recipient
address)
modify port
<IDX>
<PORT>
0-15
1-65535
Modify a rule for SNMP trap
transmission (the trap recipient port)
modify type
<IDX>
<TYPE>
0-15
trapsink/
trap2sink/
informsink
Modify a rule for SNMP trap
transmission (the SNMP message type)
quit
Terminate this CLI session
remove
<IDX>
0-15
Remove a rule for SNMP trap
transmission:
restart snmpd
Yes/no
Restart the SNMP client
ro
<RO>
String, 63 characters
max.
Set a password for parameters reading
rw
<RW>
String, 63 characters
max.
Set a password for parameters reading
and writing
show
Show SNMP configuration
syscontact
<SYSCONTACT>
String, 63 characters
max.
Specify contact information
syslocation
<SYSLOC>
String, 63 characters
max.
Specify device location
sysname
<SYSNAME>
String, 63 characters
max.
Specify device name
4.3.14 Numbering Schedule Configuration Mode
To enter this mode, execute the numplan command in the configuration mode.
SMG4-[CONFIG]> numplan
Entering Numbering-plan mode.
SMG4-[CONFIG]-[NUMPLAN]>
Command
Parameter
Value
Action
?
Show the list of available commands
config
Return to the Configuration menu
create prefix
<IDX_Numplan>
0-15
Create a prefix in the specified
numbering schedule