ELTEX SMG-4 - Statistics Mode

120 SMG digital gateway
and press <Enter>.
2) Enter a new password:
New password:
3) Confirm the entered password:
Retype password:
Password changed (Password for admin changed by root)
4) Save the configuration into Flash: enter the save command and press <Enter>.
4.3.3 Statistics Mode
This mode is used to view statistics in accordance with Q.752 ITU-Т guideline tables.
4.3.3.1 Entering the Statistics View Mode
Command syntax: statistic
4.3.3.2 Entering the MTP (SS-7) Signalling Traffic Viewing Mode
Command syntax: mtp
Execution result: Change to MTP statistic mode
SMG4-[STAT]-[MTP]>
4.3.3.3 Parameters of the MTP Traffic Statistics View Commands
<LINK> Е1 stream number;
<LINKSET> SS-7 line group number;
< TIME1> time span represented in statistics (hours);
< TIME2> time span represented in statistics (minutes).
4.3.3.4 View the MTP Traffic General Status
Command syntax: signalling link allstat <LINK> <TIME1> <TIME2>
Example: SMG4-[STAT]-[MTP]> signalling link allstat 8 12 0
Meaning: The executed command shows statistics for the 8
th
E1 stream from all
tables in the 12-hours 00-minutes interval.
4.3.3.5 View Signalling Traffic (MTP Message Accounting)
Q.752 ITU-Т guidelines, Table 15
Command syntax: message accounting <LINK> <TIME1> <TIME2>
Example: SMG4-[STAT]-[MTP]> message accounting 8 12 0
Execution result:
+---------------------------------------------------+
| SS7 MTP message accounting. Link 08 |
+---------------+-----------------+-----------------+
| Period: 00:00:00 – 00:00:00 ( 0 sec) |
+---------------------------------+-----------------+
| | Messages | Octets |