ELTEX SMG-4 - Page 121

SMG digital gateway 121
+---------------+-----------------+-----------------+
| Received | 0 | 0 |
+---------------+-----------------+-----------------+
| Transmitted | 0 | 0 |
+---------------+-----------------+-----------------+
Meaning: The executed command shows the MTP signalling traffic volume for the
8
th
E1 stream in the 12-hours 00-minutes interval.
4.3.3.6 View MTP Signalling Link Faults and Performance Counters
Q.752 ITU-Т guidelines, Table 1
Command syntax: signalling link faults_and_performance <LINK> <TIME1> <TIME2>
Example: SMG4-[STAT]-[MTP]> signalling link faults_and_performance 8 12 0
Execution result:
+---------------------------------------------------+
| MTP SL faults and performance. Link 08 |
+---------------------------------------------------+
| Period: 00:00:00 – 00:00:00 ( 0 sec) |
+---------------------------------+-----------------+
| Duration the In-service state | 0 sec |
+---------------------------------+-----------------+
| SL failure events all reasons | 0 |
+---------------------------------+-----------------+
| Number of SU received in error | 0 |
+---------------------------------+-----------------+
Meaning: The executed command shows signalling link faults and performance
counters for the 8
th
E1 stream in the 12-hours 00-minutes interval.
4.3.3.7 View the Availability Time of MTP Signalling Link
Q.752 ITU-Т guidelines, Table 2
Command syntax: signalling link availablility <LINK> <TIME1> <TIME2>
Example: SMG4-[STAT]-[MTP]> signalling link availablility 8 12 0
Execution result:
+---------------------------------------------------+
| MTP SL availability. Link 08 |
+---------------------------------------------------+
| Period: 00:00:00 – 00:00:00 ( 0 sec) |
+---------------------------------+-----------------+
| Duration of SL unavailability | 0 sec |
+---------------------------------+-----------------+
Meaning: The executed command shows the availability time of signalling link of
the 8th E1 stream in the 12-hours 00-minutes interval.
4.3.3.8 View MTP Signalling Link Utilisation Metrics
Q.752 ITU-Т guidelines, Table 3
Command syntax: signalling link utilization <LINK> <TIME1> <TIME2>