ELTEX SMG-4 - Working with Objects and the Objects Menu; Saving Configuration and the Service Menu; Time and Date Settings; Firmware Upgrade Via Web Interface

SMG digital gateway 111
 Server port—the server port the system log will be sent to.
4.1.15 Working with Objects and the Objects menu
In addition to clicking the create, edit, and remove icons, the corresponding
operations with an object can be performed using the Objects menu.
4.1.16 Saving Configuration and the Service menu
To discard all changes, select the Service—Discard All Changes menu item.
To write the current configuration into the non-volatile memory of the device, select the Service—Save
Configuration into FLASH menu item.
To restart the device firmware, select the Service—Firmware Restart menu item.
To restart the device completely, select the Service—Device Restart menu
item.
To perform forced time re-synchronisation with the NTP server, select the
Service— Restart NTP Client menu item.
To read/write the main device configuration file, select the Service—
Configuration Files Management menu item.
To configure the local date and time manually, select the Service—Date and
Time Configuration menu item; see section 4.1.17.
To update the firmware via web interface, select the Service—Firmware Update menu item; see section
4.1.18.
To update/add licences, select the Service—Licence Update menu item; see section 4.1.19.
4.1.17 Time and Date Settings
The system time and date can be specified in the respective fields in the
HH:MM and DD.month.YYYY formats.
To save settings, use the Apply button.
Click the Synchronise button to synchronise the device system time with
the current time on a local PC.
4.1.18 Firmware Upgrade via Web Interface
To upgrade the device firmware, use the Service—Firmware
Upgrade menu item.
The firmware file upload form opens.
 Firmware upgrade—updates firmware of the control
program and/or Linux kernel.
To update the firmware, use the Browse button to specify the