ELTEX SMG-4 - Network Parameter Configuration Mode

144 SMG digital gateway
- Subscriber—used for local
calls and incoming long-
distance calls;
- National—used in
outgoing long-distance
calls or in local calls and
incoming long-distance
calls instead of the
"Subscriber";
- International—used in LD
and CLR lines for outgoing
international calls;
- network_specific—a
specific network number;
- unknown—an unknown
number type;
- any—any number type.
–
change type
<MODIFIER_INDEX>
<MODIFIER_TYPE>
0-8191
calling/called
Change the modifier's
subscriber type
(caller/callee)
exit
Return from this
configuration submenu to
an upper level
history
Show the history of
entered commands
quit
Terminate this CLI session
remove
<MODIFIER_INDEX>
0-8191
Remove the specified
modifier
show
<MODIFIER_INDEX>
0-8191
Show modifier
configuration
4.3.13 Network Parameter Configuration Mode
To enter this mode, execute the network command in the configuration mode.
SMG4-[CONFIG]> network
Entering Network mode.
SMG4-[CONFIG]-NETWORK>
Command
Parameter
Value
Action
?
Show the list of available
commands
add interface
pptpVPNclient
<LABEL>
<IPADDR>
Allowed characters: letters,
numbers, "_", ".", "-", ":";
255 characters max.
IP address in the
AAA.BBB.CCC.DDD format
Allowed characters: letters,
numbers, "_", ".", "-";
Add a new VPN/PPTP client
LABEL—interface name;
IPADDR—IP address of the PPTP
server;
USER—username;