24 SMG digital gateway
4 DEVICE CONFIGURATION
The device provides 4 connection options: web interface, the Telnet protocol, SSH, or RS-232 cable
connection (for access via RS-232, SSH, or Telnet, use CLI).
All settings will take effect without gateway restart. To save configuration changes into the non-
volatile memory, use the Service/Save Configuration into Flash menu in the web configurator or
the COPY RUNNING_TO_STARTUP command in CLI.
4.1 SMG Configuration via web Interface
To configure the device, establish a connection to the device in a web browser (hypertext document
viewer), e. g. Firefox, Google Chrome. Enter the device IP address in the address bar of the web browser.
SMG factory default IP address: 192.168.1.2, network mask: 255.255.255.0.
As soon as the IP address is entered, the device will request username and password.
Initial startup username: admin, password: rootpasswd.
Upon access to the web configurator, the System Information menu opens.
To Next Page
Loading...
