ELTEX SMG-4 - Page 93

SMG digital gateway 93
 IP channels state (statistics for the current calls via IP).
Statistics of the current calls performed via IP channels includes the following data:
 channel number;
 channel state;
 call identifier;
 caller MAC address;
 caller IP address;
 caller number;
 callee MAC address;
 callee IP address;
 callee number;
 channel engagement duration.
– Sys Name—device name.
– Sys Contact—contact information.
– Sys Location—device location.
– ro Community—parameter read password/community.
– rw Community—parameter write password/community.
– Apply—applies the changes.
– Reset—discards the settings.
4.1.9.2 SNMP Trap Configuration
For detailed monitoring parameters and traps description, see MIB files on the disk shipped
with the gateway.
The SNMP agent sends an SNMPv2-trap message in case of the following events:
 configuration error;
 SIP module failure;
 IP submodule failure;
 linkset failure;
 SS-7 signal channel failure;
 synchronisation loss or synchronisation from a lower priority source;
 E1 stream failure;
 remote stream failure;
 configuration error fixed;
 SIP-T module restored after a failure;
 IP submodule restored after a failure;
 linkset restored after a failure;
 SS-7 signal channel restored after a failure;
 synchronisation from a higher priority source restored;
 no stream failure (after a failure or remote failure);