ELTEX SMG-4 - Page 94

94 SMG digital gateway
 FTP server is unavailable, RAM utilisation for storing CDR files exceeds 50% (15–30 MB);
 FTP server is unavailable, RAM utilisation for storing CDR files is less than 50% (5–15 MB);
 FTP server is unavailable, RAM utilisation for storing CDR files is below 5 MB;
 firmware update or configuration file upload/download status.
 Restart SNMPd—click the button to restart the SNMP client.
To create, edit, or remove trap parameters, use the following buttons:
— Add;
— Edit;
— Remove.
 Type—type of the SNMP message (TRAPv1, TRAPv2, INFORM).
 Community—the password contained in traps.
 IP address—IP address of the trap recipient.
 Port—UDP port of the trap recipient (default port: 162).
4.1.9.3 FTP Server
This section allows configuration of an integrated FTP server used for provisioning FTP access to the
following directories:
 cdr—a directory with CDR files.
 log—a directory with tracing files and other debug data.
 mnt—a directory with files located on external storage devices (SSD drives, USB flash drives).
4.1.9.4 FTP Server Settings
 Enable—enables/disables the local FTP server.
 Network interface—the network interface selected for the FTP server.
 Port—the TCP port selected for the FTP server.