blocked/
individual-ublock/
group-unblock/
group-reset
Define initialisation type for this line
group
no_change/
no_encountered/
encountered
Configure the indicator of interaction
with other signalling systems:
no_change—transfer a value from the
incoming call without any
changes;
no_encountered—do not report on
interaction with a network which
does not support the majority of
services provided by the ISDN
network;
encountered—report on interaction at
selected locations (the ISDN
network interacts with a network
which does not support the
majority of services provided by
the ISDN network and is unable
to use the commonly used
features).
Allowed characters:
letters, numbers, "_";
31 characters max.
Set a name of the line group
international/
reserved/federal/
national
Set a network identifier:
international—an international
network;
reserved—a reserved network;
federal—a federal network;
national—a local network.
Select a numbering schedule for a
linkset
Set a code for the SS-7 line group's own
signalling point
Select the primary SS-7 line group for
the combined mode
Terminate this CLI session
Check for Redirecting and Original Called
numbers in IAM if the Redirection
Information parameter is set
Notify / do not notify about
disconnection when the suspend
message is received
Select a redundant SS-7 line group
Select a scheduled routing profile
Identify availability of a satellite channel
while operating through this SS-7 line
group
Select the secondary SS-7 line group for
the combined mode
Show configuration of this SS-7 line
group
Select an SS-7 timer profile
speech/
64kb_unrestricted/
3.1KHz_audio
Define the Transmission Medium
Requirement for this SS-7 line group