ELTEX SMG-4 - Page 157

SMG digital gateway 157
connection trunk name
as the value.
auth nas port type
<PORT_TYPE>
Async/
Sync/
ISDN_Sync/
ISDN_Async_v120/
ISDN_Async_v110/
Virtual/
PIAFS/
HDLC_Channel/
X25/
X75/
G3_Fax/
SDSL/
ADSL_CAP/
ADSL_DMT/
IDSL/
Ethernet/
xDSL/
Cable/
Wireless/
Wireless_IEEE_802.1
Define a NAS physical port
type (a server for user
authentication), the default
value is Async
auth pass
<PASSWD>
A password, 15 characters
max.
Set the User-Password
attribute values in the
corresponding RADIUS-
Authorization packet
auth restrict
<RESTRICT>
none/zone/
local/emergency/
restrict-all
Restrict the outgoing
communications in case of a
server fault (no response from
the server):
none—allow all calls;
zone—allow calls to special
services, local and zone
networks;
local—allow calls to special
services and local
networks;
emergency—allow calls to
special services only;
restrict all—deny all calls.
auth service type
<SERVICE_TYPE>
none/
Login/
Framed/
Callback_Login/
Callback_Framed/
Outbound/
Administrative/
NAS_Promt/
Authenticate_Only/
Callback_NAS_Prompt/
Call_Check/
Callback_Administrative
Set a type of service; not used
by default (none)
auth session time
<SESSION_TIME_MODE>
ignore/
use_RFC_
Session_timeout/
use_CISCO_h323_
credit_time
Set the maximum call duration
based on a value of the
attribute transmitted in
Access-Accept from the
RADIUS server: