ELTEX SMG-4 - Page 172

172 SMG digital gateway
based on analysis of the caller
number received from the
incoming channel
name
<s_name>
Allowed characters: letters, numbers,
"_"; 31 characters max.
Set a trunk group name
quit
Terminate this CLI session
radius profile
<IDX>
0-31/ no
Set a RADIUS profile
reserv
<TG_RSV_IDX>
0-31
Set the number of the
redundant trunk group
show
Show trunk group
configuration
To enter the trunk direction configuration mode, execute the trunk direction <DIRECTION_INDEX>
command in the configuration mode, where <DIRECTION _INDEX> is a trunk group number.
SMG4-[CONFIG]> trunk direction 0
Entering trunk-mode.
SMG4-[CONFIG]- TRUNK_DIRECTION[0]>
Command
Parameter
Value
Action
?
Show the list of available commands
config
Return to the Configuration menu
Exit
Return from this configuration
submenu to an upper level
history
Show the history of entered
commands
list add
<TD_TRUNK>
0-63
Add the trunk group with the
specified index into the direction
list remove
<TD_TRUNK>
0-63
Remove the trunk group with the
specified index from the direction
mode
successive_forward/
successive_backward/
first_forward/
last_backward
Define the method of trunk group
selection for the direction:
sequential forward;
sequential back;
from the first and forward;
from the last and back.
name
<s_name >
String, 63 characters max.
Set a name of the trunk direction
quit
Terminate this CLI session
show
Show trunk direction configuration