ELTEX SMG-4 - Page 185

SMG digital gateway 185
'PREFIX' [00]:
name: 'Prefix#00'
type: 'trunk'
idx: 0
access cat: 0 [no check]
direction: 'local'
CdPN type: '<no-change>'
CdPN npi: 'isdn/telephony'
get CID: n
need CID: n
dial mode: no change
not dial ST: no
priority: 100
Stimer: 5
duration: 30
PLAN: 0
Mask for prefix [00]:
[000] – [called]
Mask: ([67]xxxxxx|9[1-3]xxxxx)
Ltimer: 10
Stimer: 5
Duration: 30
SMG4-[CONFIG]-[NUMPLAN]-PREFIX[0]> exit // Exit the prefix configuration mode
Leaving Prefix mode
SMG4-[CONFIG]-[NUMPLAN]> prefix 1
// Enter the prefix configuration mode for transition to trunk group 1
Entering Prefix-mode
SMG4-[CONFIG]-[NUMPLAN]-PREFIX[1]> type trunk // Set the prefix type—"transition to trunk group"
Prefix[1]. Set type '1'
SMG4-[CONFIG]-[NUMPLAN]-PREFIX[1]> trunk 1// Assign transition to trunk group 1 by prefix
Prefix[1]. Set idx '1'
SMG4-[CONFIG]-[NUMPLAN]-PREFIX[1]> mask edit // Enter the mode which allows configuration of dialling masks and
analysis of caller numbers
Entering Prefix-Mask mode
SMG4-[CONFIG]-[NUMPLAN]-PREFIX[1]-MASK> add ([1-3]xxxxxx)
// Add a dialling mask according to the objective
PrefixMask. add
NEW 'PREFIX-MASK' [01]: successfully created
PrefixMask. Created with index [01].
'PREFIX-MASK' [01]:
mask: ([1-3]xxxxxx)
prefix: 1
type: called
Ltimer: 10
Stimer: 5
Duration: 30
SMG4-[CONFIG]-[NUMPLAN]-PREFIX[1]-MASK> exit// Exit the mode which allows configuration of dialling masks and
analysis of caller numbers
Leaving Prefix-Mask mode
SMG4-[CONFIG]-[NUMPLAN]-PREFIX[1]> called transit// Set a transit for callee number type
Prefix[1]. Set called '5'
'PREFIX' [01]:
name: 'Prefix#01'
type: 'trunk'
idx: 0
access cat: 0 [no check]
direction: 'local'
CdPN type: '<no-change>'
CdPN npi: 'isdn/telephony'
get CID: n
need CID: n
dial mode: no change
not dial ST: no