EasyManua.ls Logo

ELTEX SMG-4 - Page 194

ELTEX SMG-4
198 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
194 SMG digital gateway
SIPT-Interface[11]. Set netiface_sig 'eth0'
// Set an interface for media
SMG4-[CONFIG]-SIP/SIPT/SIPI-INTERFACE[11]> net-interface rtp eth0
SIPT-Interface[11]. Set netiface_rtp 'eth0'
// Complete configuration of SIP interface
SMG4-[CONFIG]-SIP/SIPT/SIPI-INTERFACE[11]> exit
Leaving SIPT mode.
// Configuration of E1 stream and channel for transit
// Enter to E1 stream configuration mode
SMG4-[CONFIG]> e1 0
Entering E1-stream mode
// Set SS7
SMG4-[CONFIG]-E1[0]> signaling ss7
E1[0]. Set Signaling 3
// Enable stream
SMG4-[CONFIG]-E1[0]> enabled
E1[0]. Set line 'on'
// Enter to SS7 configuration mode
SMG4-[CONFIG]-E1[0]> ss7
E1[0]. Signaling is SS7
// Enable transit mode
SMG4-[CONFIG]-E1[0]-[SS7]> transit set usage 1 yes
Transit:
01: remote stream [ 0] remote channel [ 1] role 'passive' codec '.............
NONE' SIP Inteface [00] 'incoming'
// Set SIP interface for transit
SMG4-[CONFIG]-E1[0]-[SS7]> transit set sip_interface 1 11
Transit:
01: remote stream [ 0] remote channel [ 1] role 'passive' codec '.............
NONE' SIP Inteface [11] 'SIP-interface11'
// Set channel number on the remote side
SMG4-[CONFIG]-E1[0]-[SS7]> transit set remote_channel 1 4
Transit:
01: remote stream [ 0] remote channel [ 4] role 'passive' codec '.............
NONE' SIP Inteface [11] 'SIP-interface11'
// Set stream number on remote side
SMG4-[CONFIG]-E1[0]-[SS7]> transit set remote_stream 1 1
Transit:
01: remote stream [ 1] remote channel [ 4] role 'passive' codec '.............
NONE' SIP Inteface [11] 'SIP-interface11'
// Quit SS7 configuration mode
SMG4-[CONFIG]-E1[0]-[SS7]> exit
Leaving SS7-signaling mode.
// Quit E1 stream configuration mode
SMG4-[CONFIG]-E1[0]> exit
Leaving E1-stream mode.
// Quit configuration mode
SMG4-[CONFIG]> exit
Leaving configuration mode.
On the second object
// SIP interface configuration
// Enter to configuration mode
SMG4> config
Entering configuration mode.
// Create SIP interface for transit
SMG4-[CONFIG]> new sipt-interface
NEW 'SIP/SIPT INTERFACE' [2]: successfully created
//Enter to SIP interface configuration mode
SMG4-[CONFIG]> sip interface 2

Table of Contents

Related product manuals